LIFSAIR isolation relay (Gen 2) for Lifesaver smoke, heat and CO alarms for connection to auxiliary devices.

LIFSAIR – ISOLATION RELAY (GEN 2)

MODEL: LIFSAIR

Isolation relay (Gen 2) for Lifesaver smoke, heat and CO alarms for connection to auxiliary devices such as sirens, sounders, emergency lights, security and fire panels.

SKU: LIFSAIR Categories: Auxiliary Products, Auxiliary Products, Lifesaver

Operates in absence of mains voltage and only when alarm device is in alarm state
Selectable relay options; latching, pulse and CO latching mode
240V AC / 30V DC 5Amp contact rating
Normally Open and Normally Close contact options
When CO latching mode is selected, only CO alarm activation will trigger the isolation relay

Operating Coil Voltage	5V – 10V DC
Secondary Contacts	Normally Open Normally Closed (change-over contacts)
Contact options	Pulse, Latching, CO Latching
Secondary Contact Rating	240V AC 50Hz @ 5 Amps 30V DC @ 5 Amps
Contact Switching Time Delay	4 seconds once activated
Maximum No. of interconnected smoke alarms to a single LIFSAIR unit	24
Maximum number of LIFSAIR relay connected to one smoke alarm	3
Operating Temperature	0° – 50°C
Dimensions	89mm Deep x 68mm Wide x 45mm High

Datasheet Manual