Wireless interconnect base to suit Lifesaver LIF5800/2 and LIF5800RL/2 smoke alarms.

LIFWMB2 – SMOKE ALARM WIRELESS INTERLINK BASE

psa_lifesaver_logo2

MODEL: LIFWMB2

SUPERSEDED BY THE LIF6000WB

Wireless interconnect base to suit Lifesaver LIF5800/2 and LIF5800RL/2  smoke alarms. This model supersedes the LIFWMB.

The interlink protocol is also compatible with the LIF10YPEW smoke alarm.

 

 

  • Wireless interconnect base for Lifesaver LIF5800/2 or LIF5800RL/2 smoke alarms
  • Interlink protocol is compatible with LIF10YPEW smoke alarm
  • RF module to wirelessly interconnect smoke alarms
  • Connect up to 24 smoke alarms in a network
  • 100m line of sight, 30m indoors
  • Quick to install and avoids cost of running interconnecting cables
  • All smoke alarms in the wireless network activates when one smoke alarm activates
  • Smoke alarms do not need to be on the same circuit
  • RF module approved and certified to AS/NZS 4268:2017                       
  • The redesigned LIFWMB2 Wireless base transmits on a different frequency to the earlier LIFWMB Wireless base. Thus it cannot be wirelessly interconnected with the LIFWMB.
Compliance

AS/NZS 4268:2017
AS/NZS 60950.1:2015
RCM
Manufactured to ISO9001 Standard
ActivFire Approved
Power Source

from Smoke Alarm
Interconnect

up to 24 units and compatible with LIF10YPEW
RF Frequency

918mHz
RF Range

30m indoors
100m line of sight
Temperature Range

0 deg – 45 deg celcius
Humidity

up to 95% relative humidity (RH)
Warranty

5 years manufacturer\'s warranty
Compatibility

LIF5800/2, LIF5800RL/2 and LIF10YPEW
Datasheet Quick Setup Guide